Additional sensor

The sensor for monitoring the unloading of garbage containers is designed to identify unloaded containers and determine the fact and time of their unloading.

The sensor works with containers that are unloaded by overturning (overturning).

The sensor counts the number of container unloads for a given period of time.

Water leak detector SP-1 is:

• A household appliance designed and manufactured to industrial standards.
• Lifetime warranty, with a service life of 7 years.
• Work from one set of batteries up to 10 years.

Batteries are not included with the water leak detector and must be purchased separately.

With the help of a radio tag, you can monitor the presence of objects in the PRS reception area: cars in the garage, cars approaching for unloading, etc.

The RM-01 radio tag can be used for identification:

• trailers and semi-trailers;
• mounted tools and tools;
• other replaceable devices and mechanisms.
• Power supply of the radio tag: ER14250 battery - 3.6 V, 1200 mAh
• Data transmission distance: up to 30 m

With the help of a radio tag, you can monitor the presence of objects in the PRS reception area: cars in the garage, cars approaching for unloading, etc.

The DU-R1 radio tag can be used for identification:

• trailers and semi-trailers;
• mounted tools and tools;
• other replaceable devices and mechanisms.
• Power supply of the radio tag: ER14250 battery - 3.6 V, 1200 mAh
• Data transmission distance: up to 30 m

With the help of a radio tag, you can monitor the presence of objects in the PRS reception area: cars in the garage, cars approaching for unloading, etc.

The DU-R2 radio tag can be used for identification:

• trailers and semi-trailers;
• mounted tools and tools;
• other replaceable devices and mechanisms.
• Power supply of the radio tag: ER14505 battery - 3.6 V, 2400 mAh
• Data transmission distance DU-R2: up to 80 m
• Data transmission distance DU-R2U: up to 200 m

The differential wireless tilt angle sensor consists of two universal DU-R2 sensors:

• a reference sensor fixed motionless on the frame.;
• a measuring sensor attached to the controlled mechanism.

Data is transmitted to the terminal:

• Over the RS485 bus (LLS or modbus protocol).
• For the frequency output.
• By analog output (when using the PRS-INT-01 interface converter).

The detector-Logger RYAD-R02 is attached by means of a magnetic base, outside or inside the vehicle, in the area of the driver's cab.

The detector-Logger RYAD-R02 automatically records the turn-on times and the duration of operation of the GPS/GLONASS signal suppressor. All received data for the last 12 months are stored in the memory of the detector-logger R-R 02 and can be read by a USB radio reader or a USB Radio Programmer.

The digital input sensor can be used for:

• - Measure the temperature of the ambient air sensor.
• - Control of the door opening when the sensor is connected to the door reed switch.
• - Monitoring the position of the mechanisms, when connecting the sensor to the limit switch.
• - Monitoring the supply voltage when the sensor is connected to the contacts of the intermediate relay or to the optocoupler.
• - Recording the fact of pressing the button.
• - As a radio lengthener for digital inputs.

The converter of the PRS-INT-01 interface is used to convert the signal coming from the radio signal receiver via the RS-485 bus into analog and frequency signals. This is necessary for terminals that do not have support for the RS-485 interface.

The interface converter does not need to be set up and is ready for operation immediately after connecting to the radio receiver and applying the power supply voltage through a 1 A fuse.

The PRS-03 radio signal receiver is designed for communication of radio sensors manufactured under the brand name " Autosensor"

• Red (Yellow) - On the "plus" power supply (from 9 V to 45 V).
• Black (Brown) - On the "minus" power supply.
• Blue (Green) – RS-485 (B) or frequency or discrete (depending on the settings).
• White-RS-485 (A) or frequency or discrete (depending on the settings).
• Please note! The PRS-03 supports only one frequency output at a time.

The radio reader is designed to read data from the memory of radio sensors using a PC. The data received from the radio sensors are processed by the appropriate software.

The program features allow you to:

• - conduct effective control over automotive equipment at small enterprises;
• - effectively resolve disputes when there are doubts about the reliability of the data transmitted by the terminal (jamming the GPS signal, disabling the terminal, etc.).

The radio program is designed for configuring wireless sensors " Autosensor "(radio sensors) using a PC.

Each radio programer is named. It contains complete information about its owner: the name of the organization, address, phone numbers, contact person. This information is transmitted and recorded in the log of the configured radio sensor and is available for further viewing.

The radio programer is connected to the USB port of a personal computer.

The DP-R01 wireless radio sensor is used to detect the presence of a passenger.

The sensor records the received information in its own memory and transmits it to the terminal via a link: "Sensor-Radio signal receiver-Terminal".

The sensor sensor is installed under the seat upholstery, and the unit is fixed in any convenient place.

The sensor is designed to measure the speed and determine the direction of rotation of the container of the concrete mixer truck.

The sensor detects rotation in the plane perpendicular to the ground, as well as at an angle of up to 45 degrees from the plane perpendicular to the ground.

Completeness

• 1. Sensor DU-R1 1 pc.
• 2. Mounting stand 1 pc.
• 3. Device for sealing mounting nuts 2 pcs.